Effect of Moisture Content on the Angle of Repose and Coefficient of Kinetic Friction of Sago Trunk (Metroxylon spp.)
DOI:
https://doi.org/10.36877/aafrj.a0000179Abstract
Starch is one of the food sources that can be extracted from cereals, roots, tubers and stem. Sago palm (metroxylon spp.) is one example of the starch source. The efficiency of the starch extraction process depends on the mechanical properties of process material. This study was conducted to determine the angle of repose between grated sago and kinetic friction of the contact surface between process material and machine. The angle of repose (θ) of grated sago was determined by using a cone shape hopper attached to an adjustable height bar. The cone was filled with a 100g sample of grated sago and slowly adjusted to an upward direction to release the grated sago and will form a conical shape. The cone shape base diameter and height were measured. Next, a square block of debarked sago trunk (8cm × 8cm × 8cm) was placed on a stainless steel plate and attached to a rope at middle connected to force gauges. The pulling speed was at 1.27 mm/min and the result of total pulling load (F) was recorded. The process was repeated for materials with different moisture content (MC) of 60%, 50%, 40%, and 30%. Based on the experimental results, the angle of repose (AoR= 47.000±0.31) and coefficient of kinetic friction (μ k) 0.88±0.005 at MC= 60% showed decrease in value (AoR= 43.610±0.34; μ k = 0.83±0.002) when the MC decrease by 30% (P<0.01).
References
Al-Hashemi, H. M. B., Al-Amoudi, O. S. B., (2018). A review on the angle of repose of granular materials. Powder Technol, 330, pp 397-417.
ASTM (1992). Friction, lubrication and wear technology. ASM Handbook, 18, pp 69
Bagherpour, H., Minaei, S., Khoshtaghaza, M. H., (2009). Selected physico-mechanical properties of lentil seed. Int. Agrophysics, 23, PP 81-84
Balasubramanian, S., Viswanathan, R., (2010). Infl uence of moisture content on physical properties of minor millets. J Food Sci Technol, 47(3), pp 279–284. DOI: 10.1007/s13197-010-0043-z
Baxter, J., Tuzun, U., Heyes, D., Hayati, I., Fredlund, P., (1998). Stratification in poured granular heaps. Nature, 391, pp 136.
Cecil J. E., (2002). The development of technology for the extraction of sago. In: Kainuma K, Okazaki M, Toyoda Y, Cecil JE, editors. Proceedings of the International Symposium on Sago (Sago 2001). Tokyo, Japan: Universal Academy Press Inc. pp 83–91.
Cheng, N. S. (2018). Angle of Repose. Encyclopedia of Engineering Geology, Springer International Publishing AG 2018’ pp 1–3.
Coskun, M. B., Yalcin, I., Ozarslan, C., (2006). Physical properties of sweet corn seed (Zea mays saccharata Sturt.). J. Food Eng., 74, pp 523-528.
Darma, Santos, B., Reniana, (2017). Development of Cylinder Type Sago Rasping Machine Using Pointed Teeth .International Journal of Engineering & Technology IJET-IJENS, 17 (01)
DOA, (2015). Department of Agriculture. Malaysia Industrial Crops Statistics, Putarajaya.
Frette, V., Christensen, K., Malthesorenssen, A., Feder, J., Jossang, T.,
Meakin, P., (1996). Avalanche dynamics in pile of rice. Nature, 49, pp 379.
Jong, F. S., (1995). Distribution and Variation in the Starch Content of Sago Palms (Metroxylon sagu Rottb.) at Difference Growth Stages. Agriculture Research Center, Department of Agriculture, Kucing, Sarawak, Malaysia. SAGO PALM, 3, pp 45-54
Kanawade, L. R., Bhosale, B. W., Kadam, M. S., (1990). Effects of moisture content on certain selected physical properties of pulse seeds. Journal of Maharashtra Agricultural Universities, 15(1), pp 60-62.
Kamal, S. M. M., Mahmud, S. N., Hussain, S. A., Ahmadun, F. R., (2007). Improvement on sago flour processing, International Journal of Engineering and Technology, 4(1), pp. 8-14
Karim, A. A., Pei-Lang Tie, Manan, D. M. A., Zaidul, I. S. M., (2008). Starch from the Sago (Metroxylon sagu) Palm Tree-properties, Prospect, and Challenges as a new Industries Source for Food and Other Uses. Comprehensive Reviews in Food Science and Food Safety. Institute of Food Technology.
Malaysia Dept. of Statistic, 2005. SARAWAK Export of Sago Starch, SITC Code: 592-150
Nicolas, H., Theresa, M., Fabian, S., Daniel, K., Herbert, B., Hans, H., (2018). Drying effects and dry matter losses during seasonal storage of spruce wood chips under practical conditions. Biomass and Bioenergy, 111, Pp 196-205
Robbins, M. O., Müser, M. H., (2000). Handbook of Modern Tribology, ed. B. Bhushan. CRC Press, Boca Raton.
Train, D., (1958). Some aspects of the property of angle of repose of powders. Journal of Pharmacy and Pharmacology, 10, pp 127–135. https://doi.org/10.1111/j.2042-7158.1958.tb10391.x
Wan Mohd Fariz, W. A., Rosnah, S., Azman, H., Mohd Shahrir, A., Saiful Azwan, A., Asnawi, S. H., Zainun M. S., (2018). Effect of grater position on the size of grated sago (Metroxylon spp.). Food Research, 2(6), pp 572 – 577
Zhou, Y. C.,. Xu, B. H, Yu, A. B., Zulli, P., (2002). An experimental and numerical study of the angle of repose of coarse spheres. Powder Technology, 125(1), pp 45-54
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Wan Mohd Fariz Bin Wan Azman, Rosnah Binti Shamsudin, Mohd Zuhair Bin Mohd Nor, Azman Bin Hamzah
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.
This broad license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
The author(s) permits HH Publisher to publish this article that has not been submitted elsewhere.
.png){kind=logo}
.jpg)
