3 In 1 Disc Ridger: Development of An Improved Implement For Sweet Potato Plant-Bed Making, Fertilizing and Mechanical Weeding

Authors

  • Anuar B. Abdullah Malaysian Agricultural Research and Development Institute
  • Nurul Afza Karim
  • Md. Akhir Hamid
  • Shahmihaizan Mat Jusoh
  • Mohd Fazly Mail
  • Khairul Idzwan Ayub
  • Norahshekin Abdul Rahman
  • Zawayi Mat

DOI:

https://doi.org/10.36877/aafrj.a0000170

Abstract

Mechanization has been the solution to counter issue such as labor shortage and low production rate on field in the agricultural sector. Adaptation of mechanization system  could lower the cost of production, improve quality and also reduce the tedious work of labor. Current practice, which contributes to high cost in labor since the job requires a lot of man power. MARDI has developed a complete machinery package for sweet potato production from land preparation until harvesting. One of the important activities that require an implementation of machinery aspect is ridge forming. This activity is essential due to the height of the ridge influences the yield. It is believed that the higher the ridge will contribute, to more aeration and thus, produce higher yields. In this manuscript, the authors report on the development and evaluation of the disc ridger. It is believed that this implement is capable to be used as ridge forming as well as inter-row cultivator. This tractor-mounted implement was designed with two units of high quality steel discs which is attached to the frame with disc diameter and thickness of 720 mm and 6 mm  respectively. This disc ridger is able to form either a single row or double row planting ridges to suit with the desired planting system for sweet potato. This is due to the location of the discs at the frame which is adjustable. Furthermore, this implement also can be employed as an inter-row cultivator for weeding control of sweet potato planting in the early stages. In addition, this implement also equipped with granular based fertilizer applicator in which 2 application can be performed together which are weeding and fertilizing. The recorded field capacity of this machine is 0.29 ha/hr for bed forming and 0.28 ha/hr for inter-row weeding and fertilizing. In terms of fertilizer application performance, the average amount of fertilizer to be withdrawn for 50m bed is 1.53kg or 7.65g/plant, which is complied to the agronomist recommendation.

References

Zaharah, A., Md. Akhir, H., Yahaya, H., Anuar, A., Abdul Rahim, M., Hasan, S., (2010). Prosedur Operasi Piawaian (SOP) Penanaman Ubi Keledek Berjentera di Tanah Bris. MARDI.

Tan, S.L, Abdul Aziz, A.M., Zaharah, A., Sukra, A.B., Md.Akhir, H. dan Mohsin,Y. (2006). Manual Penanaman Ubi Keledek. MARDI: Serdang

Gomes G (1999). Sweet Potato Growth Characteristics, (First Edition), Academic Press, New York, pp. 4-7. Onwuene IC (1999). The Tropical Tuber Crops, John Wiley and Sons Ltd, London, p.43

Maniyam N., Gangadharan B., Susantha K., (2012). Sweet Potato Agronomy, Fruit, Vegetable and Cereal Science and Biotechnology, Global Science Books.

Mohammed A., Nigussie-Dechassa R., and Bekele A., (2011). Effect of planting methods and vine harvesting on shoot and tuberous root yields of sweet potato [Ipomoea batatas (L.) Lam.] in the Afar region of Ethiopia. African Journal of Agricultural Research.

Grisso, R.D., Kocher, M.F., Adamchuk, V.I., Jasa, P.J. and Schroeder, M.A. (2004). Field Efficiency Determination Using Traffic Pattern Indices. Applied Engineering in Agriculture, 20(5), 563.

Hanna, M. (2016). Estimating the Field Capacity of Farm Machines. Retrieved from Iowa State University website: https://www.extension.iastate.edu/agdm/crops/html/a3-24.html

Nasri, N.N., Nawi, N.M., Abdullah, N., Saripa, S. and Mat, R. (2015). Measurement of Field Efficiency for Different Field Operations in Sweet Corn Production. Proceedings of the Technology and Innovation National Conference, 1–6.

Zandonadi, R.S. (2012). Computational Tools for Improving Route Planning in Agricultural Field Operations. Lexington, Kentucky: University of Kentucky, PhD Thesis.

Zhou, K., Leck Jensen, A., Bothtis, D.D. and Sørensen, C.G. (2012). Simulation modelling for in-field planning of sequential machinery operations in cropping systems. Denmark: Aarhus University, PhD Thesis.

Downloads

Published

2020-12-29

How to Cite

Abdullah, A. B., Karim, N. A., Hamid, M. A., Mat Jusoh, S. ., Mail, M. F., Ayub, K. I., Abdul Rahman, N., & Mat, Z. (2020). 3 In 1 Disc Ridger: Development of An Improved Implement For Sweet Potato Plant-Bed Making, Fertilizing and Mechanical Weeding. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000170

Issue

Section

ORIGINAL RESEARCH ARTICLE
Abstract viewed = 457 times
PDF downloaded = 484 times