Development and Validation of a LEGO®-Based Texture Analyser for Tensile Testing Using Gelatine-Based Films with Different Glycerol Concentrations
DOI:
https://doi.org/10.36877/aafrj.a0000627Abstract
Texture analysis is important for evaluating the mechanical properties of biobased plastics, providing valuable insights into their performance, durability, and suitability for various applications. However, conventional texture analysis is often expensive and complex, limiting its accessibility in academic research. Hence, this study employed a cost-effective alternative using a LEGO®-based texture analyser developed with Visual Studio Code, Arduino IDE, and MINDSTORMS EV3, adhering to ASTM D6882-12 (2012) to evaluate the mechanical properties of bio-based films, such as gelatine-based films. Gelatine was extracted from tilapia fish scales and incorporated with different concentrations of glycerol. It was indicated that increased glycerol content reduced tensile strength but enhanced elongation at break. The study concluded that the implementation of the LEGO®-based texture analyser was compatible with the conventional texture analyser for evaluating mechanical properties of gelatine-based films, showing a percentage deviation of 5.19% for tensile strength and 6.20% for elongation at break. The findings validated the LEGO®-based texture analyser as a cost-effective and efficient alternative for mechanical testing of biobased plastics, making it a promising option for small-scale academic research on biobased plastics.
References
AI-Temimi, W. K., A. Kalaf, A., Imran, R. A. (2021). Enzymatic and Thermal Extraction of Gelatin from Fish Scales and study its Sensory Properties. International Journal of Pharmaceutical Research, 13(02). https://doi.org/10.31838/ijpr/2021.13.02.172
Arif, Z. U., Khalid, M. Y., Sheikh, M. F., et al. (2022). Biopolymeric sustainable materials and their emerging applications. Journal of Environmental Chemical Engineering, 10(4), 108159. https://doi.org/10.1016/j.jece.2022.108159
ASTM D638-14. (2015, March). Standard Test Method for Tensile Properties of Plastics. https://cdn.standards.iteh.ai/samples/90583/40feb391a6a1460bba03ed8731a05494/ASTM-D638-14.pdf
ASTM D882-12. (2012). Standard Test Method for Tensile Properties of Thin Plastic Sheeting. ASTM International, West Conshohocken, PA.
Aziz, N. A., Zain, N. M., Saidin, S., et al. (2024). The potential of hydrocolloid-modified fish gelatine in substituting non-halal gelatine for halal dessert cuisine. Food Research, 8(4), 252–265. https://doi.org/10.26656/fr.2017.8(4).163
Azmi, N. S., Kadir Basha, R., Tajul Arifin, N. N., et al. (2020). Functional properties of Tilapia’s fish scale gelatin film: Effects of different type of plasticizers. Sains Malaysiana, 49(09), 2221–2229. https://doi.org/10.17576/jsm-2020-4909-19
Azmi, N. S., Basha, R. K., Othman, S. H. P., et al. (2024). Development of fish gelatin film for anti-fogging mushroom packaging. Journal of Food Engineering. https://www.sciencedirect.com/science/article/pii/S0260877424003728?via%3Dihub
Babaremu, K., Oladijo, O. P., Akinlabi, E. (2023). Biopolymers: A suitable replacement for plastics in product packaging. Advanced Industrial and Engineering Polymer Research, 6(4), 333–340. https://doi.org/10.1016/j.aiepr.2023.01.001
Binsi, P. K., Nayak, N., Sarkar, P. C., et al. (2017). Gelation and thermal characteristics of microwave extracted fish gelatin–natural gum composite gels. Journal of Food Science and Technology, 54(2), 518–530. https://doi.org/10.1007/s13197-017-2496-9
Giménez, B., Gómez-Estaca, J., Alemán, A., et al. (2009b). Improvement of the antioxidant properties of squid skin gelatin films by the addition of hydrolysates from Squid Gelatin. Food Hydrocolloids, 23(5), 1322–1327. https://doi.org/10.1016/j.foodhyd.2008.09.010
Gladysz, G. M., Chawla, K. K. (2015). Intrinsic voids in polymers. In Elsevier eBooks (pp. 37–48). https://doi.org/10.1016/b978-0-444-56367-5.00003-8
Gómez-Estaca, J., Montero, P., Fernández-Martín, F., et al. (2009). Physico-chemical and film-forming properties of bovine-hide and tuna-skin gelatin: A comparative study. Journal of Food Engineering, 90(3), 480–486. https://doi.org/10.1016/j.jfoodeng.2008.07.020
Gonz´alez, P., Medina, C., Fam´a, L., et al. (2016). Biodegradable and non-retrogradable eco-films based on starch – glycerol with citric acid as crosslinking agent. Carbohydrate Polymers, 138, 66–74. https://doi.org/10.1016/j. carbpol.2015.11.041
Hinge, M., Johnson, J. A., Henriksen, M. L. (2021). A low-cost tabletop tensile tester with optical extensometer. Materials Advances, 2(19), 6339–6343. https://doi.org/10.1039/d1ma00598g
Hosseini, S., Azari, P., Cardenas-Benitez, B., et al. (2020). A LEGO inspired fiber probe analytical platform for early diagnosis of Dengue fever. Materials Science and Engineering C, 109, 110629. https://doi.org/10.1016/j.msec.2020.110629
Hwang, S., Jin, S. H., Kim, Y., et al. (2021). Deciphering van der Waals interaction between polypropylene and carbonated fly ash from experimental and molecular simulation. Journal of Hazardous Materials, 421, 126725. https://doi.org/10.1016/j.jhazmat.2021.126725
Kanwate, B. W., Kudre, T. G. (2022, July 12). Impact of different extraction conditions on yield, physicochemical and functional characteristics of gelatin from Labeo rohita swim bladder. Food Science and Biotechnology, 31(10), 1277–1287. https://doi.org/10.1007/s10068-022-01121-z
Karim, S. F. A., Jai, J., Hamid, K. H. K., et al. (2021). Characterization of polyethylene-starch based film at a different percentage of crude palm oil and Aloe vera gel. IOP Conference Series Materials Science and Engineering, 1053(1), 012039. https://doi.org/10.1088/1757-899x/1053/1/012039
Karim, S. F. A., Jai, J., Hamid, K. H. K., et al. (2022). Characterization of glycerol and aloe vera as plasticizer in Polyethylene/Starch-Based film. Pertanika Journal of Science & Technology, 30(2), 1527–1544. https://doi.org/10.47836/pjst.30.2.37
Li, X., He, Y., Dong, X., et al. (2020). Effects of hydrogen-bonding density on polyamide crystallization kinetics. Polymer, 189, 122165. https://doi.org/10.1016/j.polymer.2020.122165
Limpisophon, K., Tanaka, M., Weng, W., et al. (2009). Characterization of gelatin films prepared under-utilized blue shark (Prionace Glauca) skin. Food Hydrocolloids, 1993–2000.
Machmud, M. N., Fahmi, R., Abdullah, R., et al. (2013). Characteristics of red algae bioplastics/latex blends under tension. International Journal of Science and Engineering, 5(2). https://doi.org/10.12777/ijse.5.2.81-88
McNeese, B. (2018). Acceptance Criteria for Measurement Systems Analysis (MSA). SPC For Excel. https://www.spcforexcel.com/knowledge/measurement-systems-analysis-gage-rr/acceptance-criteria-for-msa/
Moshood, T. D., Nawanir, G., Mahmud, F., et al. (2022). Sustainability of biodegradable plastics: New problem or solution to solve the global plastic pollution?. Current Research in Green and Sustainable Chemistry, 5, 100273. https://doi.org/10.1016/j.crgsc.2022.100273
Nandy, K., Collinson, D. W., Scheftic, C. M., et al. (2018). Open-source micro-tensile testers via additive manufacturing for the mechanical characterization of thin films and papers. PLoS ONE, 13(5), e0197999. https://doi.org/10.1371/journal.pone.0197999
Negrete-Bolagay, D., & Guerrero, V. H. (2024). Opportunities and challenges in the application of bioplastics: Perspectives from formulation, processing, and performance. MDPI. https://www.mdpi.com/2073-4360/16/18/2561
Nurhayati, N., Kusumawati, R., Suryanti, N. (2021). The effect of NaOH addition on the characteristics of tilapia skin collagen. IOP Conference Series Earth and Environmental Science, 924(1), 012089. https://doi.org/10.1088/1755-1315/924/1/012089
Perera, K. Y., Jaiswal, A. K., Jaiswal, S. (2023). Biopolymer-Based Sustainable Food Packaging Materials: Challenges, solutions, and applications. Foods, 12(12), 2422. https://doi.org/10.3390/foods12122422
Petroudy, S. D. (2016). Physical and mechanical properties of natural fibers. In Elsevier eBooks (pp. 59–83). https://doi.org/10.1016/b978-0-08-100411-1.00003-0
Rather, J. A., Akhter, N., Ashraf, Q. S., et al. (2022). A comprehensive review on gelatin: Understanding impact of the sources, extraction methods, and modifications on potential packaging applications. Food Packaging and Shelf Life, 34, 100945. https://doi.org/10.1016/j.fpsl.2022.100945
Talib, A. T. P., Mohammed, M. A., Baharuddin, A. S., et al. (2019). Mechanical characterisation of lignocellulosic fibres using toy bricks tensile tester. Journal of the Mechanical Behavior of Biomedical Materials, 97, 58–64. https://doi.org/10.1016/j.jmbbm.2019.05.010
U.S. Naval Academy. (n.d.). Chapter 10: Deformation. Naval Academy, Department of Naval Architecture and Ocean Engineering. Retrieved April 13, 2025, from https://www.usna.edu/NAOE/_files/documents/Courses/EN380/Course_Notes/Ch10_Deformation.pdf
Wang, L., Kan, J., Tang, L., et al. (2025). The effects of glycerol addition on the physicochemical, structural and mechanical properties of salt-gelatinized rice starch-based film. LWT, 117427. https://doi.org/10.1016/j.lwt.2025.117427
Weng, W., Wu, F., 2015. Water resistance and mechanical property improvement of tilapia (Tilapia zillii) scale gelatin films by dehydrated thermal treatment. Journal of Food Science and Technology. 52(6), 3358–3366. https://doi.org/10.1007/s13197-014-1401-z.
Wonganu, B. (2020). Application of gelatin derived from waste tilapia scales to an antibiotic hydrogel pad. E3S Web of Conferences, 141, 03004. https://doi.org/10.1051/e3sconf/202014103004
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Amer Shaferul Ekhwan Amenuddin, Roseliza Kadir Basha, Danish Ibrahim Sharuddin, Noor Zafira Noor Hasnan, Nor Amaiza Mohd Amin, Azhari Samsu Baharuddin, Mohd Afandi P Mohammed, Khairul Faezah Md Yunos

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.

This broad license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
The author(s) permits HH Publisher to publish this article that has not been submitted elsewhere.
.png)

.jpg)


