Palm oil as a versatile halal ingredient: A review of its sterilization process
Abstract
Palm oil is one of many edible oil crops available for human consumption. It prevails as a necessary halal raw material because of its outstanding characteristics and versatility of applications; such as its high-pressure oxidation resistance, capability to dissolve insoluble chemicals and its high coating power; besides it does not cause any skin irritation if used in cosmetics. To reach acceptability, the oil palm fruit undergoes various steps, namely sterilization, thresher, digester, screw press and oil clarifier. The Sterilization process is key for the success of further steps and is very costly compared with other processes. Additionally, it is necessary to optimize the entire process until the final product is reached. The sterilization process still needs further research pertaining to efficiency issues regarding energy usage and minimum oil losses that are cost effective for small and big factories. In this article, the process, types and energy consumption of palm oil sterilization are briefly described. This would be beneficial for beginners who are interested in palm oil milling, especially the sterilization process.References
AGEB, 2010. Worldwide Palm Oil consumption by use.
Ali, F. S., Samsuddin, R., & Robiah, Y. (2014). Effect of chopping oil palm fruit spikelets on the free fatty content release rate and its mechanical properties. International Journal of Research in Engineering and Technology, 3(1): 511–516.
Bamgboye, A. I., & Onwe, D. N. (2015). Development of a dual-energy steam boiler for small-scale sterilization of palm fruit. International Journal of Engineering and Technology Volume, 5(5).
Copeland, D., & Belcher, M. W. (2001). Methods for refining vegetable oils and by products thereof. US6172247.
Cheng, S F., Mohd Nor, L., & Chuah, CH. (2011). Microwave pretreatment: A clean and dry method for palm oil production. Industrial Crops and Products, 34(1): 967–971.
Chua N. S., Lee, K. H., & Tong, S. L. (2009). Personal communication. Kek Seng (M) Bhd, Masai, Johor, Malaysia.
Choto, A., Thongurai, C., Kladkaew, N., & Kiatweerasakul, M. (2014). Sterilization of oil palm fruit using radio-frequency heating. International Journal of Advance in Chemical Engineering and Biological Science, 1(1).
Chow, M., & A. Ma, A. (2001). Microwave in the processing of fresh palm fruits. Presented at the PIPOC International Palm Oil Congress (Chemistry and Technology).
Damodaran, S. (2005, July). Biomass fired boilers for power generation design consideration. Paper presented at BioGen Workshop 2005. Malaysia, Seri Kembangan.
Demirbas, A. (2004). Combustion characteristics of different biomass fuels. Progress in Energy and Combustion Science, 2004;30: 219–230.
Eaton. (2012). 2012 Catalog [PDF file]. Retrieve from http://www.novaflow.com.my/wpcontent/themes/webtemp/pdf/ICEPO%202012%20Part3.pdf.
FAO. (n.d.). Retrieved from http://www.fao.org/docrep/006/t0309e/T0309E01.htm.
FAO. (2002). The FAO Technical Paper on Small-scale palm oil processing in Africa. Retrieved from http://www.fao.org.
Hadi, N A., Han, N M., May, C Y et al. (2012). Dry heating of palm oil fruits: Effect on selected parameters. American Journal of Engineering and Applied Sciences, 5(2): 128–131.
Hadi, S., Ahmad, D., & Akande, F. B. (2009). Determination of the bruise indexes of oil palm fruits. Journal of Food Engineering, 95: 322–326.
Hudzari, M. R., Wan Ismail, W. I., Ramli, A. R. et al. (2010). Proceeding from 2nd International Conference on Islamic Science and Technology (ISTech): Colour for agriculture product in Al-Quran. Johor Bharu, Malaysia.
Jusoh, J. M., Rashid, N. A., & Omar, Z. (2013). Effect of sterilization process on deterioration of bleachability index (DOBI) of crude palm oil (CPO) extracted from different degree of oil palm ripeness. International Journal of Bioscience, Biochemistry and Bioinformatics, 3(4): 322–327.
Kamal, A. A. M. (2003). The study of heat penetration in palm oil fruitlets by developing a new technique for measuring oil content in fruiltlet during sterilization process (Unpublished Paper).
Khaik C. O., Sau K. T., Hun T. K., & Augustine S. H. O. (1985). Fatty acid synthesis in the oil palm (Elaeis Guineensis): Incorporation of acetate by tissue slices of the developing fruit. Lipids, 20(4).
Khalis, S. S., Abidin, Z. Z., & Yunus, R. (2015). Effect of ultrasound on the quality of crude palm oil in water. Asian Journal of Science and Technology, 6(5): 1441–1446.
Let, C. C. (1995). Handling, storage and transportation of fresh fruit bunch and palm oil products. Palm Oil Technical Bulletin, 1: 2–4.
Lim, C.L. (2007). The use of spherical sterilizer for sterilization of fresh fruit bunches. PIPOC International Palm Oil Congress.
Lim, K. Y. (2010). A call to arms: To defend palm oil. Global Oils and Fats Business Magazine, 7: 9–11.
Loh, T. W. (1994). Proceedings from the 1994 PORIM National Palm Oil Milling and Refining Technology Conference: Innovative methods in oil processing oil palm industry. Kuala Lumpur.
Loh, T. (2009). The way forward in the palm oil milling process with the advent of tilting sterilizer. PIPOC International Palm Oil Congress.
Mahidin, M. R. (1998). Quality improvement in the production of Malaysian palm oil. Palm Oil Development, 9: 15–21.
Mangoensoekarjo, S & H. Semangun. (2003). Manajemen agrobisnis kelapa sawit. Yogyakarta: Gajah Mada University Press.
Matthaus, B. (2012). Technological innovations in major world oil crops. Oil Technology, 2: Perspectives.
Morad, N. A., Aziz, M. K. A., & Zin, R. M. (2006). Process design in degumming and bleaching of palm oil. Center of Lipids Engineering and Applied Research, Malaysia.
Nazarulhisyam, S., & Kaida, K. (2009). Effectiveness of sterilization of oil palm bunch using microwave technology. Industrial Crops and Products, 3(2): 179–183.
Nor’aini, S., & Siew, W.L. (1990). Quality control measures in the palm oil industry. Palm Oil Developments.
Olie, J. J., & Tjeng, T. D. (1974). The extraction of palm oil. The Incorporated Society of Planters, Kuala Lumpur, pp. 29–35.
Ologunagba F. O., Ojomo A. O., & Lawson, O. S. (2010). Development of a dual powered palm fruit stripper. ARPN Journal of Engineering and Applied Sciences. 5(11).
Owolarafe, O. K., & Faborode, M. O. (2008). Micro-structural characterisation of palm fruit at sterilisation and digestion in relation to oil expression. Journal of Food Engineering, 85: 598–605.
Rajanaidu, N., & Tan, B. K. (1983). Variability of fatty acid composition (fac) within bunches in the oil palm Elaeis guineensis. Oleagineux, 38: 581–584.
Reese, C. D. (2009). Industrial safety and health for infrastructure services. CRC Press Taylor and Francis Group.
Sarah, M. (2013). Microwave sterilization of oil palm fruits: Effect of power, temperature and d-value on oil quality. Journal of Medical and Bioengineering, 2(3).
Sivasothy, K. (2000). Palm oil milling technology. Advances in Palm Oil Research, 1: 745–775.
Sivasothy., Basiron, Y., Suki, A., et al. (2006). Continuous sterilization: The new paradigm for modernizing palm oil milling. Journal of Oil Palm Research, (Special Issue – April 2006): 144–152.
Sommart, K & Pipatmanomai. (2011). Assessment and improvement of energy tilization in Crude Palm Oil Mill. International Conference on Chemistry and Cemical Process 2011, 10.
Sundaresan A., Arumughan C., Prasad K.V.S.V., et al. (1990). Proceeding from PORIM international palm oil development conference - chemistry, technology and marketing: Design of indigenous small scale edible palm oil extraction unit. Kuala Lumpur, Malaysia.
Tagoe, S. M. A., Dickinson, M. J., & Apetorgbor, M. M. (2012). Factors influencing quality of palm oil produced at cottage industry level in Ghana. International Food Research Journal, 19(1): 271–278.
Tan, C.H., Hasanah, M.G., Ainie, K., et al. (2009). Extraction and physicochemical properties of low free fatty acid crude palm oil. Food Chemistry, 113: 645–650.
Tan, H. S. (2002). Microwave heating of palm oil fresh fruit samples. United Nations Educational, Scientific and Cultural Organization. Retrieved from http://www.etawau.com.
Tan, H. (1981). Microwave heating of oil-palm fresh fruit samples. United Nations Educational, Scientific and Cultural Organization.
Velayuthan A. (1985). Product recovery – Pamol Plantations Sdn Bhd. In: Proc. Symp. Impact of the pollinating weevil on the Malaysian oil palm industry (pp. 305–315). Palm Oil Research Institute of Malaysia, Kuala Lumpur. [13.4.5.2].
Wahid, B. (2008). Biofertilizer and effluent management for the oil palm industry. National Seminar on Biofertiliser, Biogas and Effluent Treatment in the Palm Oil Industry.
Wai-lin, S. (2011). Edible oil processing—production palm oil milling process. Retrieved from http://lipidlibrary.aocs.org/processing/palmoil/index.htm.
Wood B. J. (1985). Biological control of vertebrates — A review and an assessment of prospects for Malaysia. Journal of Plant Protection in the Tropics, 2: 67–79.
Yusoff S. (2006). Renewable energy from palm oil — Innovation on effective utilization of waste. Journal of Cleaner Production, 14: 87–93.
Zu, K. S. A., Adjei-Nsiah, S., & Bani, R. J. (2012). Effect of processing equipment and duration of storage of palm fruits on palm oil yield and quality in the Kwaebibrem District, Ghana. Agriculture Research and Review, 1(1): 18–25.
Downloads
Published
How to Cite
Issue
Section
License
Author(s) shall retain the copyright of their work and grant the Journal/Publisher right for the first publication with the work simultaneously licensed under:
Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). This license allows for the copying, distribution and transmission of the work, provided the correct attribution of the original creator is stated. Adaptation and remixing are also permitted.
This broad license intends to facilitate free access to, as well as the unrestricted reuse of, original works of all types for non-commercial purposes.
The author(s) permits HH Publisher to publish this article that has not been submitted elsewhere.
.png){kind=logo}
.jpg)
